AT-VM95SH
VM95 series Shibata stereo cartridge
The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz.
- Aluminium cantilever
- 3.5mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- 20 to 25,000Hz frequency response
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
Shibata Stylus
Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume.
No use of nuts
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.
Model Number |
AT-VM95SH |
Cartridge EAN Code |
4961310145989 |
Type |
VM Stereo Dual Magnet |
Frequency Response |
20 - 25,000Hz |
Channel Separation |
23 dB (1kHz) |
Output Channel Balance |
1.5 dB (1kHz) |
Output Voltage |
3.5mV (1kHz, 5cm/sec.) |
Vertical Tracking Angle |
23˚ |
Vertical Tracking Force Range |
1.8 – 2.2g (2.0g standard) |
Stylus Shape |
Shibata |
Stylus Radius |
2.7 x 0.26 mil |
Stylus Construction |
Nude Square Shank |
Cantilever |
Aluminium Pipe |
Static Compliance |
20 x 10-6 cm/dyne |
Dynamic Compliance |
10 x 10-6 cm/dyne (100Hz) |
Wire Used For Coil |
T.P. Copper |
Coil Impedance |
3.3kΩ |
DC Resistance |
485 Ω |
Recommended Load Impedance |
47.000Ω |
Recommended Load Capacitance |
100 – 200pF |
Coil Inductance |
550 mH (1kHz) |
Cartridge Weight |
6.1g |
Mounting |
2 x M2.6 Treaded inserts |
Replacement Stylus |
AT-VMN95SH |
Replacement Stylus EAN Code |
4961310146047 |
Accessories Included |
2x 11mm installation screws; 2x 8mm installation screws; 2x washers; non-magnetic screwdriver |
Dimentions |
17.2 (H) x 18.9 (W) x 28.3 (L) mm |
Specs