Audio-Technica AT33SA

Hover over an image to enlarge

749,00
(Including tax)
In stock
+
AT33SA

AT33SA

MOVING COIL CARTRIDGE

  • Advanced tapered boron cantilever and reduced weight
  • Neodymium magnet with dramatically enhanced magnetic energy
  • PCOCC coil
  • High-separation, wide response dual moving coil
  • VC mold limits unnecessary vibration
  • A tough body designed to be rigid

AT33SA

AT33SA

MOVING COIL CARTRIDGE

The AT33Sa is the first Audio-Technica MC cartridge model to feature a Shibata stylus. In addition to its superior high-range performance as a line-contact stylus, the Shibata stylus produces mid and bass sound that is strong and rich. The Shibata stylus is mounted on a boron cantilever with a double damper to greatly improve sound quality.

Advanced tapered boron cantilever and reduced weight
The AT33Sa uses a tapered boron cantilever. Tapering the cantilever and revising the number of coil rotations reduce the weight, giving the cartridge better high range performance and wide range reproduction.
 
Neodymium magnet with dramatically enhanced magnetic energy and permendur yoke
The model uses a neodymium magnet with maximum energy product BHmax of 50 [kJ/m3] and a permendur yoke with high saturation flux density and outstanding magnetic properties, which further enhances the concentrated magnetic field of the coil gap.
 
Neodymium magnet for dramatically increased magnetic energy
The neodymium magnet provides maximum energy (BHmax of 50[kJ/m3]), while the pure iron yoke provides excellent magnetic properties. Together, they further boast the magnetic field concentrated in the coil gap area.
 
PCOCC coil
The PCOCC coil enables purer transmission because it is not subject to grain boundaries in the direction of transmission. *PCOCC = Pure Copper by Ohno Continuous Casting process (Monocrystalline high-purity oxygen- free copper)
 
High-separation, wide response dual moving coil
The basic structure is an original MC type, with separate cylindrical coils to the left and right channels. Since power is generated independently in each of the left and right channels, this structure offers truly superior separation. If the signal from the opposite channel escapes, this can cause intermodulation distortion and have a decisive impact on audio quality and how the stereo sound spreads. The structure of this product ensures a clear and smooth sound. Additionally, the two coils have a reverse-V shape which reduces effective moving mass as seen from the stylus tip, limiting unnecessary movement of the coil and further eliminating distortion.
 
VC mould limits unnecessary vibration
The VC mould that affixes the coils is made with hard synthetic resin containing potassium titanate to make it highly strong and rigid. This improvement results in a lighter product, which reduces unnecessary vibration.

A tough body designed to be rigid
The product’s housing is made of precision-cast hard aluminium alloy. Hard synthetic resin sandwiching in the structure on the top and bottom suppresses parasitic resonance. This minimises unnecessary noise while enhancing rigidity and the signal-to-ratio.

 

“SUPERIOR HIGH-RANGE PERFORMANCE”

With its superior high-range performance as a line-contact stylus, the Shibata stylus produces mid and bass sound that is strong and rich.

“OUTSTANDING MAGNETIC PROPERTIES”

Neodymium magnet with dramatically enhanced magnetic energy and permendur yoke with high saturation flux density and outstanding magnetic properties.

“ENABLES PURER TRANSMISSION”

The PCOCC coil enables purer transmission because it is not subject to grain boundaries in the direction of transmission.

Type Dual Moving Coil
Mounting 1/2” centers
Frequency Response 15 - 50,000Hz
Body Material Aluminium/Synthetic Resin
Channel Separation 30dB (1kHz)
Output Channel Balance 0.5dB (1kHz)
Output Voltage 0.4mV (1kHz and 5cm/sec.)
Vertical Tracking Angle 23°
Vertical Tracking Force Range 1.8 - 2.2g (2.0g standard)
Stylus Shape Shibata
Stylus Curvature Radius Shibata
Stylus Construction Nude square shank
Cantilever Nude tapered boron
Coil Impedance 10Ω (1kHz)
Coil Inductance 22 µm (1kHz)
DC Resistance 10Ω
Static Compliance 40×10-6cm/dyne
Dynamic Compliance 10×10-6cm/dyne (100Hz)
Recommended Load Impedance Min 100Ω
Weight 6.9g
Dimensions H16×W16.6×D26.5mm
Replacement Stylus  
Accessories Included 1 non magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)

Specs

 

Possibly you may be interested
 
SL-1200GR2ES
Technics SL-1200GR2 Direct Drive Turntable System Technics introduces the next generation of Direct Drive Turntables with a revolutionary new drive...
1990,00 (Including tax)
In stock
+
Compare
Add to wish list Compare
HS-10
Analogis Headshell HS-10 Inclusief kleur gecoddeerde aansluitdraden met vergulde clips Bevestiging van een extra headshell gewicht aan bovenzijde is...
19,50 (Including tax)
In stock
+
Compare
Add to wish list Compare
AT-MG10
Audio Technica AT-MG10 Magnesium Headshell Magnesium body headshell with a weight of 10 grams Threaded headshell avoiding in use of nuts when fitting...
55,00 (Including tax)
In stock
+
Compare
Add to wish list Compare
Fast and high quality delivery

Our company makes delivery all over the world

Quality assurance and service

We offer only those goods, in which quality we are sure

Worldwilde shipment

Extra security & packaging during shipment